Rockford Fosgate R165-S Prime Series 6.5" 80W Peak Power Handling at 4-Ohms, 2-Way Component Car Speaker System
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Woofers
- • (2) Tweeters (each with attached 70" speaker wire terminated by quick-slide connectors)
- • (2) Grilles
- • (2) Flush mounting tweeter housings (with tweeters installed)
- • (2) Angled surface mounting tweeter housings
- • (2) Flush-mount retaining clips
- • (8) 1-1/4" Self-tapping screws
- • (4) 5/8" Flat-head screws
- • (8) Speed-clips
- • Owner's Manual
Why Choose Rockford Fosgate R165-S Component Car Subwoofer?
Component Speaker System
The Rockford Fosgate R165-S is a component speaker system designed to deliver exceptional sound quality and performance in in-car audio systems. Its high-quality construction and advanced features offer a premium audio experience for enthusiasts. The R165-S includes two 6.5-inch woofers and a pair of separate tweeters.
Detailed High-frequency Responses
This component setup allows for better sound imaging and separation compared to traditional coaxial speakers. The woofer cones are constructed with polypropylene material, providing durability and accurate sound reproduction. The 1-inch Mylar dome tweeters deliver smooth and detailed high-frequency responses, bringing out the nuances in vocals and instruments.
Moderate Power Inputs
With a power handling of 40 watts RMS and 80 watts peak power per speaker, the R165-S can handle moderate power inputs and deliver robust sound output. The speakers have a sensitivity rating of 89 dB, ensuring efficient sound production even with lower power sources. The R165-S speakers have mounting hardware and grilles for easy installation and added protection.
Frequently Asked Questions (FAQ)
- • Why isn't the system producing enough bass?
Check the speaker polarity, amplifier settings, mounting, and connections. Incorrect polarity or loose wiring can reduce midbass response and make the system sound noticeably weaker than expected.
- • Why do the tweeters sound too bright or harsh?
Excessive treble can result from incorrect equalizer settings, tweeter placement, or crossover configuration. Adjust the treble gradually and verify both tweeters are wired and positioned correctly.
- • Why is one speaker louder than the other?
Check the balance and fade controls before inspecting the wiring. Loose connections, reversed polarity, or differences in speaker mounting can cause uneven output between the left and right channels.
- • Can I install these speakers with my factory radio?
Yes. They can be used with many factory systems, although an aftermarket amplifier can provide additional clean power and improve overall volume, dynamics, and sound quality.
- • Why do the speakers distort when I turn up the volume?
Distortion may occur when the factory radio or amplifier is clipping. Lower the volume slightly, check the gain settings, and make sure the speakers are receiving clean power within their capabilities.
- • Why is there little or no sound from the tweeters?
Inspect the crossover connections and tweeter wiring. A loose connector, incorrect wiring, or damaged crossover can prevent the high-frequency driver from receiving the proper audio signal.
- • Why do I hear buzzing or rattling from the door speakers?
Check the speaker mounting hardware, door panel, and surrounding trim. Loose components can vibrate when the speakers play bass and create rattling that may be mistaken for speaker damage.
- • Do I need an amplifier for better performance?
An amplifier is not always required, but additional clean power can improve volume and dynamics. Make sure the amplifier is properly matched and tuned to avoid clipping or speaker damage.
- • Why does the sound seem weak after replacing the factory speakers?
Verify polarity, crossover wiring, speaker mounting, and the factory radio's output settings. Incorrect phase or an incomplete installation can make an aftermarket upgrade sound weaker than expected.
- • Where should the tweeters be positioned for the best sound?
Mounting them near the factory locations or higher in the doors or A-pillars can improve imaging. Aim both tweeters toward the listening area and keep their positions reasonably symmetrical.
- Diameter : 6.5 Inch
- Sensitivity : 89 dB
- Impedance : 4 Ohm
- Frequency Response : 60-20000 Hz
- Peak Power Handling : 80 Watts
- Design : 2 Way
- Woofer Composition : Injection Molded Polypropylene
- Shallow Mount : Yes Inch
- RMS Power Handling : 40 Watts
Features:
- Mica Injected Polypropylene Woofers: The woofer cones are mica injected polypropylene. This material is light weight and rigid for decreased distortion and improved bass response.
- Tweeter: The 1/2" Mylar tweeters are a balanced dome design. A semi-dome tweeter has a dome placed inside a cone. Balanced dome tweeters are semi-dome tweeters with equal reproduction area given the cone and dome portions of the tweeter. Out of the box, the tweeters are mounted in the flush mount housings. An angled surface mount housing is also included, and the back of the the flush mount housing and the top of the angled surface mount housing are combined to make the (non-angled) surface mount housing. Once mounted, the tweeters swivel so you can direct them toward the listening positions.
- Crossovers: A 6 dB/octave high-pass crossover is integrated into the case of each tweeter. The woofers have two spades on each terminal; the wire from the tweeter, as well as the wire from the source are connected there.
Specifications:
- Speaker Size: 6 1/2
- Design: 2-way
- Tweeter Design: 1/2" Balanced Dome
- Impedance (Ohms): 4
- Tweeter Composition: Mylar
- Woofer Composition: Mica Injected Poly
- Woofer Surround: Foam
- Parts Warranty: 1 Year
- Labor Warranty: 1 Year
- Sensitivity (1W at 1 meter): 89
- Sensitivity at 2.83 volts: 92
- Frequency Response: 60 - 20k Hz
- Minimum RMS Wattage: ---
- Maximum RMS Wattage: 40
- Peak Power Handling (Watts): 80
- Top-mount Depth (Inches): 2
- Bottom-mount Depth (Inches): 2 1/8
- Cutout Diameter or Length (inches): 4 7/8
- Mounting Height (Inches): 0.2
- UPC: 780687341152
- Weight: 5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
2006 chrysler 300 hemi c have ten of them are very clear plus they pack a punch wow!!!!
-
They sound really nice and offer great bang for your buck. While the bass isn't as booming as the typical subs, they're definitely worth the price.
